mabie1978 Michelle Pierce Elyria, OH (111 posts) Registered: 08/25/2008 07:47PM Main British Car: 1978 MGB 3.5 Rover V8 |
Looking to buy: Buick Intake Manifold 4 bbl
Anyone out there have a spare Intake Manifold for a 4 bbl carb set up, I am looking for one to fit on my Rover 3.5L. Let me know what you have if any. If not, off to Summit Racing I guess.
Thanks! |
MGBV8 Carl Floyd Kingsport, TN (4514 posts) Registered: 10/23/2007 11:32PM Main British Car: 1979 MGB Buick 215 |
Re: Looking to buy: Buick Intake Manifold 4 bbl
Michelle,
You won't find one at Summit. They will have an Edelbrock Buick/Rover manifold. It is about 5/8-3/4" taller than a factory Buick manifold, in case you are looking to use a stock hood. There is one on Ebay. [tinyurl.com] |
mabie1978 Michelle Pierce Elyria, OH (111 posts) Registered: 08/25/2008 07:47PM Main British Car: 1978 MGB 3.5 Rover V8 |
Re: Looking to buy: Buick Intake Manifold 4 bbl
Thanks Carl, I will put that on the watch list. I must have missed that one when I did a few searches. I do plan to change the hood eventually as I picked up a MGC hood skin from Tim Nagy, but I was hoping to wait until fall to do that.
|
mabie1978 Michelle Pierce Elyria, OH (111 posts) Registered: 08/25/2008 07:47PM Main British Car: 1978 MGB 3.5 Rover V8 |
Re: Looking to buy: Buick Intake Manifold 4 bbl
Well I went ahead and picked this one up to see if I can get it to work, in the end we plan to use the FI that came with the engine. I have to find a computer set up for it though.
|