ROVER V8 SHAFT ROLLER ROCKERS
Hi Guys,
For the ones who dont know us we are an Australian outfit designing and manufacturer ing Performance Valvetrains for the Performance and racing industry for over 45 years. Recently we resurrected a few of our designs and have produced our original shaft rockers for the 3500cc-3900cc V8. We are offering a group buy(3) for enthusiasts and have the following on offer YT 6305 1.6 Complete Shaft System $1500 AUD + shipping (shown) YT 6000 1.6 Adjustable Bushed Arms to Suit std shafts $700 AUD +shipping This compete system repalces all original Rover parts except pushrods, pedestals and bolts. The Needle roller bearings, hardened and ground shafts supported by an alloy craddles that bolt directy to cylinder heads. The YT 6305 is recommended for high performance applicatiuons , due to Rover pedestals are prone to distortion resulting in shaft failure Let us know if you are interested and drop we an email jim@yellaterra.com.au Regards JIM YELLA TERRA AUSTRALIA ( I will be posting up other offers for British Performance vehicles) |
Moderator Curtis Jacobson Portland Oregon (4577 posts) Registered: 10/12/2007 02:16AM Main British Car: 71 MGBGT, Buick 215 |
Re: ROVER V8 SHAFT ROLLER ROCKERS
Gentlemen,
Please note that Yella Terra is BritishV8's newest vendor partner, and we'll be creating a proper banner ad and adding it to our vendor directory in the very near future. Yella Terra is a great fit because they offer important upgrade parts like roller rockers for BOPR aluminum V8s (above)... and they also offer a very nice range of parts for other popular V8s such as small block Fords. Superchargers. Lightweight flywheels. Etc. Etc. Buy with confidence, knowing they support this website. -Curtis |
roverman Art Gertz Winchester, CA. (3188 posts) Registered: 04/24/2009 11:02AM Main British Car: 74' Jensen Healy, 79 Huff. GT 1, 74 MGB Lotus 907,2L |
Re: ROVER V8 SHAFT ROLLER ROCKERS
Curtis and Jim of YT., do these roller rockers clear standard rocker covers ? Thanks, roverman.
|
Moderator Curtis Jacobson Portland Oregon (4577 posts) Registered: 10/12/2007 02:16AM Main British Car: 71 MGBGT, Buick 215 |
Re: ROVER V8 SHAFT ROLLER ROCKERS
I'm just learning about these rockers too, Art... but we made a banner ad tonight. Here's a sneak peak:
|
Re: ROVER V8 SHAFT ROLLER ROCKERS
The YT 6000 are the bushed arms and suit std shafts......you can use the std valve cover
The YT 6305 as pictures are adjustables and sit on a larger craddle and wyou will be required to either use spacers, or higher aftermarket valve covers dependant on valve lift.. |