Wanted: Buick 300 4v iron head / intake
i'd just as soon have all of the engine EXCEPT for the crank.
so, if you find an iron head, 4v 300 that you're taking the crank from in order to stroke your Rover engine i'd LOVE to take it off your hands. i'm located in the Indiana, Michigan, Ohio tri-state area. |
Re: Wanted: Buick 300 4v iron head / intake
bump
|
BlownMGB-V8 Jim Blackwood 9406 Gunpowder Rd., Florence, KY 41042 (6470 posts) Registered: 10/23/2007 12:59PM Main British Car: 1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS |
Re: Wanted: Buick 300 4v iron head / intake
Todd I may have a head. I will try to look tomorrow.
Jim |
Re: Wanted: Buick 300 4v iron head / intake
Don't put yourself out too much. I've already got a 340 w/heads on it.
And 2v Buick 300's are a dime a dozen. It appears that finding 4v cast intakes though, that's going to take some dedication and patience. |
BlownMGB-V8 Jim Blackwood 9406 Gunpowder Rd., Florence, KY 41042 (6470 posts) Registered: 10/23/2007 12:59PM Main British Car: 1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS |
Re: Wanted: Buick 300 4v iron head / intake
True. Have you checked with the guys over at the V8Buick site? I think Sean might have something.
Jim |
Re: Wanted: Buick 300 4v iron head / intake
bump
Remember, I'm looking specifically for the *CAST IRON*, 4 barrel intake. It's likely that this is one year only production, 1965 to be exact. There may be some early production 1966 cars that got a 4v 300ci but those should be extremely rare. |
roverman Art Gertz Winchester, CA. (3188 posts) Registered: 04/24/2009 11:02AM Main British Car: 74' Jensen Healy, 79 Huff. GT 1, 74 MGB Lotus 907,2L |
Re: Wanted: Buick 300 4v iron head / intake
Todd, Have you tried "The Buick Farm", on the webb ? Good Luck, roverman.
|
|
Re: Wanted: Buick 300 4v iron head / intake
Eh, their web page doesn't list very many intakes. None at all for the 300.
And they didn't pick up the phone when I tried to call. *shrugs* I've also tried Antique Auto and Buick Obsolete Parts with no luck. I've also been keeping track of George Nenadovich's junk yard report. Thanks for the suggestion though. |
Re: Wanted: Buick 300 4v iron head / intake
I *think* I called them about a year back. Things change though, couldn't hurt too check back with them.
|
Re: Wanted: Buick 300 4v iron head / intake
Actually, I've got a disassembled 4v engine as well as an intake now.
Thanks for checking though. |