Classified Ads: Swap Parts Here!

buy, sell, or trade - cars, parts, tools, etc. (Please keep ads out of the other forums!)

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


yellaterra
Jim Peters

(3 posts)

Registered:
10/10/2010 09:34PM

Main British Car:


ROVER V8 SHAFT ROLLER ROCKERS
Posted by: yellaterra
Date: June 01, 2011 01:16AM

Hi Guys,

For the ones who dont know us we are an Australian outfit designing and manufacturer ing Performance Valvetrains for the Performance and racing industry for over 45 years. Recently we resurrected a few of our designs and have produced our original shaft rockers for the 3500cc-3900cc V8.

We are offering a group buy(3) for enthusiasts and have the following on offer

YT 6305 1.6 Complete Shaft System $1500 AUD + shipping (shown)
YT 6000 1.6 Adjustable Bushed Arms to Suit std shafts $700 AUD +shipping

This compete system repalces all original Rover parts except pushrods, pedestals and bolts. The Needle roller bearings, hardened and ground shafts supported by an alloy craddles that bolt directy to cylinder heads. The YT 6305 is recommended for high performance applicatiuons , due to Rover pedestals are prone to distortion resulting in shaft failure
$(KGrHqYOKpkE256jhjOHBNzM4oUQjw~~_3.jpg
$(KGrHqYOKpUE24ueo-vlBNzM4egK3g~~_3.jpg

Let us know if you are interested and drop we an email jim@yellaterra.com.au

Regards

JIM
YELLA TERRA AUSTRALIA

( I will be posting up other offers for British Performance vehicles)


Moderator
Curtis Jacobson
Colorado USA
(3573 posts)

Registered:
10/12/2007 02:16AM

Main British Car:
71 MGBGT, Buick 215

authors avatar
Re: ROVER V8 SHAFT ROLLER ROCKERS
Posted by: Moderator
Date: June 02, 2011 02:22AM

Gentlemen,
Please note that Yella Terra is BritishV8's newest vendor partner, and we'll be creating a proper banner ad and adding it to our vendor directory in the very near future. Yella Terra is a great fit because they offer important upgrade parts like roller rockers for BOPR aluminum V8s (above)... and they also offer a very nice range of parts for other popular V8s such as small block Fords. Superchargers. Lightweight flywheels. Etc. Etc. Buy with confidence, knowing they support this website.
-Curtis


roverman
Art Gertz
Winchester, CA.
(2427 posts)

Registered:
04/24/2009 11:02AM

Main British Car:
74' Jensen Healy, 79 Huff. GT 1, 74 MGB Lotus 907,2L

Re: ROVER V8 SHAFT ROLLER ROCKERS
Posted by: roverman
Date: June 02, 2011 01:33PM

Curtis and Jim of YT., do these roller rockers clear standard rocker covers ? Thanks, roverman.


Moderator
Curtis Jacobson
Colorado USA
(3573 posts)

Registered:
10/12/2007 02:16AM

Main British Car:
71 MGBGT, Buick 215

authors avatar
Re: ROVER V8 SHAFT ROLLER ROCKERS
Posted by: Moderator
Date: June 03, 2011 01:40AM

I'm just learning about these rockers too, Art... but we made a banner ad tonight. Here's a sneak peak:

http://www.BritishRaceCar.com/v-yellaterra.gif


yellaterra
Jim Peters

(3 posts)

Registered:
10/10/2010 09:34PM

Main British Car:


Re: ROVER V8 SHAFT ROLLER ROCKERS
Posted by: yellaterra
Date: June 03, 2011 01:57AM

The YT 6000 are the bushed arms and suit std shafts......you can use the std valve cover
The YT 6305 as pictures are adjustables and sit on a larger craddle and wyou will be required to either use spacers, or higher aftermarket valve covers dependant on valve lift..


Sorry, only registered users may post in this forum.