pitotshock james grant Renfrew, Ontario, Canada (3 posts) Registered: 08/06/2011 07:57AM Main British Car: 69 Europa |
Rover and buick 300 v8
I was doing a british v8 conversion and piled up some parts, but sadly have lost steam on the project.
buick 300 with aluminum heads rover 3.9L from accident vehicle misc odds and ends for engine (spare block, water pump...) Asking $1500.00 neg. Also have a custom magnesium adapter plate and Audi transaxle for mid engine installation... |
pitotshock james grant Renfrew, Ontario, Canada (3 posts) Registered: 08/06/2011 07:57AM Main British Car: 69 Europa |
Re: Rover and buick 300 v8
Thanks for the advice! I have updated my profile to add location...
I am west of Ottawa, Ontario by about an hour |
Re: Rover and buick 300 v8
I'd be interested in the Buick 300 heads and the 3.9 block. What would be the cost for just those parts? I'm in Boston, MA so I would need assistance from you with regards to shipping.
thanks, Zack |
pitotshock james grant Renfrew, Ontario, Canada (3 posts) Registered: 08/06/2011 07:57AM Main British Car: 69 Europa |
Re: Rover and buick 300 v8
OK, everything is sold except the Audi transaxle and the adapter plate to a rover engine.
If anyone is interested in an '88 audi 4000 transaxle and a custom made magnesium adapter plate to bolt to the rover block I am asking $250 obo for both. James (near Ottawa Ontario) |
roverman Art Gertz Winchester, CA. (3188 posts) Registered: 04/24/2009 11:02AM Main British Car: 74' Jensen Healy, 79 Huff. GT 1, 74 MGB Lotus 907,2L |
Re: Rover and buick 300 v8, mid engine ?
James, It would be beneficial to post a picture of the Audi t-axle and adapter. Who made the adapter ? You folks looking to build a superior handling MGB GT/ etc, might consider this mid engine set-up. Rover under glass ? Cheers, roverman.
|
|