NCtim Tim Shumbera Western North Carolina (239 posts) Registered: 01/19/2012 04:35PM Main British Car: |
Re: Schiefer Buick 300 Aluminium Flywheel
I could be wrong but that looks like a flex plate for an automatic trans. I've never see a flywheel like that. If I'm right, you might want to repost correctly.
|
DiDueColpi Fred Key West coast - Canada (1365 posts) Registered: 05/14/2010 03:06AM Main British Car: I really thought that I'd be an action figure by now! |
Re: Schiefer Buick 300 Aluminium Flywheel
Thats just the backside (or crankshaft side) of the flywheel Tim.
The screwholes that are visible are to retain the friction surface on the face of the flywheel. The allen bolts and the double splines visible in the center would lead me to believe that this has a dual disc clutch attached to it. I may also be wrong but there are no living witnesses to any past errors. Cheers Fred |
BlownMGB-V8 Jim Blackwood 9406 Gunpowder Rd., Florence, KY 41042 (6469 posts) Registered: 10/23/2007 12:59PM Main British Car: 1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS |
Re: Schiefer Buick 300 Aluminium Flywheel
Now why didn't I think of that?
A good, low inertia setup. Leave it to Wotland Wotland to come up with that. He seems to find the best cast-off parts. Jim |
NCtim Tim Shumbera Western North Carolina (239 posts) Registered: 01/19/2012 04:35PM Main British Car: |
Re: Schiefer Buick 300 Aluminium Flywheel
Wow, that's some knowledge bank you've got there in your Braunschweiger. I couldn't figure out that spline pattern. Wonder what that weighs and if it would worth finding all the clutch parts to fit?
Tim |
|
roverman Art Gertz Winchester, CA. (3188 posts) Registered: 04/24/2009 11:02AM Main British Car: 74' Jensen Healy, 79 Huff. GT 1, 74 MGB Lotus 907,2L |
Re: Schiefer Buick 300 Aluminium Flywheel
Dimitri, Are you also selling the clutch assemby ? You have counted the disk ? Spline dimensions are ? Cheers, roverman.
|
Re: Schiefer Buick 300 Aluminium Flywheel
Art, yes clutch assembly is also for sale.
Specs : 3 discs 7.25" 28 splines. Ring seems to be in magnesium ( very very light). Bolt patteren is for Buick 300 crank. |
Re: Schiefer Buick 300 Aluminium Flywheel
*Sigh*
$250 for the flywheel WITH the clutch and pressure plates attached? ( You're going to make me buy this damn thing, aren't you? ) |
Re: Schiefer Buick 300 Aluminium Flywheel
PM sent.
|
|
Re: Schiefer Buick 300 Aluminium Flywheel
i thought i was buying it, but i still haven't heard back from Wotland on my PM to him.
|