Classified Ads: Swap Parts Here!

buy, sell, or trade - cars, parts, tools, etc. (Please keep ads out of the other forums!)

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


toast4283
Andy Green

(5 posts)

Registered:
02/04/2015 04:47PM

Main British Car:


Buick 300 intake 2 barrel or 4 barrel 1964
Posted by: toast4283
Date: February 04, 2015 04:59PM

I need a 1964 Buick 300 intake 2 barrel or 4 barrel. I am in Atlanta

Andy


BlownMGB-V8
Jim Blackwood
9406 Gunpowder Rd., Florence, KY 41042
(5812 posts)

Registered:
10/23/2007 12:59PM

Main British Car:
1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS

authors avatar
Re: Buick 300 intake 2 barrel or 4 barrel 1964
Posted by: BlownMGB-V8
Date: February 05, 2015 10:16AM

You can also use the BOPR intakes with a set of spacer plates and a sheet metal valley pan. That opens up a lot of possibilities.

Jim


had to buy it
Lorne Mitchell
Toronto, Ontario
(16 posts)

Registered:
11/04/2013 06:09PM

Main British Car:


Re: Buick 300 intake 2 barrel or 4 barrel 1964
Posted by: had to buy it
Date: February 05, 2015 03:08PM

I have 215 2 barrel manifold if that will do . Pic attached I hope.


had to buy it
Lorne Mitchell
Toronto, Ontario
(16 posts)

Registered:
11/04/2013 06:09PM

Main British Car:


Re: Buick 300 intake 2 barrel or 4 barrel 1964
Posted by: had to buy it
Date: February 05, 2015 03:15PM

I'll try again
manifold small size pic.jpg


toast4283
Andy Green

(5 posts)

Registered:
02/04/2015 04:47PM

Main British Car:


Re: Buick 300 intake 2 barrel or 4 barrel 1964
Posted by: toast4283
Date: February 05, 2015 07:46PM

Where would you get spacers? I have a 2 barrel Olds 215 intake. Spacers would make it work on a Buick 300 with Aluminum heads? I think carbs are limited on the 2 barrel 215 intake. I have big rochester 2barrels that would fit on a 300 intake. I also have a tiny rochester on the 215 intake


BlownMGB-V8
Jim Blackwood
9406 Gunpowder Rd., Florence, KY 41042
(5812 posts)

Registered:
10/23/2007 12:59PM

Main British Car:
1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS

authors avatar
Re: Buick 300 intake 2 barrel or 4 barrel 1964
Posted by: BlownMGB-V8
Date: February 06, 2015 02:15PM

The Aussies have 'em. TRS or Dellow would be my first tries.

Jim


Dan Jones
Dan Jones
St. Louis, Missouri
(268 posts)

Registered:
07/21/2008 03:32PM

Main British Car:
1980 Triumph TR8 3.5L Rover V8

Re: Buick 300 intake 2 barrel or 4 barrel 1964
Posted by: Dan Jones
Date: February 06, 2015 06:45PM

Andy,

I've got a 1964 Buick 300 2 barrel aluminum intake manifold. IIRC, it is in very good shape but I'll check it tonight.

Dan Jones



toast4283
Andy Green

(5 posts)

Registered:
02/04/2015 04:47PM

Main British Car:


Re: Buick 300 intake 2 barrel or 4 barrel 1964
Posted by: toast4283
Date: February 06, 2015 06:56PM

Dan
PM me with the details and lets see if we can work out a deal

Andy


Dan Jones
Dan Jones
St. Louis, Missouri
(268 posts)

Registered:
07/21/2008 03:32PM

Main British Car:
1980 Triumph TR8 3.5L Rover V8

Re: Buick 300 intake 2 barrel or 4 barrel 1964
Posted by: Dan Jones
Date: February 07, 2015 08:34PM

Replied to your PM. I found a Buick 300 four barrel and a Buick 215 2 barrel. I have another storage area to search tomorrow.

Dan


Sorry, only registered users may post in this forum.