Classified Ads: Swap Parts Here!

buy, sell, or trade - cars, parts, tools, etc. (Please keep ads out of the other forums!)

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


declan
Declan Gardner
St. Louis
(62 posts)

Registered:
05/12/2017 12:28PM

Main British Car:
1969 MGB 1800

SOLD - MGB 5 lug MGC/V* brake upgrade
Posted by: declan
Date: June 10, 2017 11:29AM

Bolt on 5 lug brake upgrade, uses all MG components. Rare front MGC 5 lug hubs, 5 x 4 3/4" bolt pattern (same as Chevy, Buick, Olds, Pontiac, Jag, etc). Factory MGB V8 calipers, rebuilt cross drilled MGC rotors (machined to factory MGB V8 diameter, .500" thick) Hub and rotor assemblies have been computer balanced MGB V8 pads (used have approx. 80-90% pad thickness) All wheel bearings, spacers, shims, caps, etc, (no seals) wheel bearings, shims and rotors marked per side, so that they can be reassembled to their original mating parts"-$800
003.JPG
004 - Copy.JPG



Edited 1 time(s). Last edit at 08/15/2017 10:45AM by MGBV8.


declan
Declan Gardner
St. Louis
(62 posts)

Registered:
05/12/2017 12:28PM

Main British Car:
1969 MGB 1800

Re: MGB 5 lug MGC/V* brake upgrade
Posted by: declan
Date: July 24, 2017 07:38PM

$700


declan
Declan Gardner
St. Louis
(62 posts)

Registered:
05/12/2017 12:28PM

Main British Car:
1969 MGB 1800

Re: MGB 5 lug MGC/V* brake upgrade
Posted by: declan
Date: August 11, 2017 10:59AM

$600


declan
Declan Gardner
St. Louis
(62 posts)

Registered:
05/12/2017 12:28PM

Main British Car:
1969 MGB 1800

Re: MGB 5 lug MGC/V* brake upgrade *SOLD*
Posted by: declan
Date: August 15, 2017 09:10AM

Sold


WernerVC
Werner Van Clapdurp
Lynchburg, Va
(91 posts)

Registered:
09/06/2009 12:56PM

Main British Car:
MGB 1977 Rover 3.5

Re: SOLD - MGB 5 lug MGC/V* brake upgrade
Posted by: WernerVC
Date: December 24, 2018 02:18PM

Hi Declan,
Just for my info, is the rear flange (hub) splined ?
I don't see that in the picture . I see a groove in the ID hub. Am I seeing that wrong ?
I used the Porsche 944 front rotors on my MGB. They fit perfect but then you are stuck with the 130 mm bolt circle. Only Porsche rims have this pattern. It is unique to the Porsche brand.
Werner


Sorry, only registered users may post in this forum.