Classified Ads: Swap Parts Here!

buy, sell, or trade - cars, parts, tools, etc. (Please keep ads out of the other forums!)

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


BlownMGB-V8
Jim Blackwood
9406 Gunpowder Rd., Florence, KY 41042
(5912 posts)

Registered:
10/23/2007 12:59PM

Main British Car:
1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS

authors avatar
300 heads/crank/bells
Posted by: BlownMGB-V8
Date: January 26, 2020 01:39PM

I have a couple sets of aluminum 300 heads, cleaned and bead blasted but should be gone through. Look to be in pretty good shape. $300/set.

1 300 crank, I'll have to look at the journal sizes, they may be stock and looked pretty good. $275

An assortment of 300 bellhousings, 4 of them I think. $100-200 depending. All cleaned and blasted. Send me a PM.

Buyer pays shipping of course.

Jim


BlownMGB-V8
Jim Blackwood
9406 Gunpowder Rd., Florence, KY 41042
(5912 posts)

Registered:
10/23/2007 12:59PM

Main British Car:
1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS

authors avatar
Re: 300 heads/crank/bells
Posted by: BlownMGB-V8
Date: February 11, 2020 02:53PM

One set of heads gone.

Jim


BlownMGB-V8
Jim Blackwood
9406 Gunpowder Rd., Florence, KY 41042
(5912 posts)

Registered:
10/23/2007 12:59PM

Main British Car:
1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS

authors avatar
Re: 300 heads/crank/bells
Posted by: BlownMGB-V8
Date: February 20, 2020 12:32PM

I have 2 bellhousings left, both have been baked and bead blasted. One is a double hump cable linkage type with no clutch fork or cover but does have the outside adjustable pivot ball $150, the other is a single hump mechanical linkage type with the clutch fork $175. I have a pending inquiry on the last set of heads, and I think I will keep the crank for a little while until I have completed the rotating assemblies on the two engines I'm now building.

Jim


blue4
bill melson

(4 posts)

Registered:
08/01/2014 11:52PM

Main British Car:


Re: 300 heads/crank/bells
Posted by: blue4
Date: February 23, 2020 03:01PM

Jim,thanks for sending pictures but I" worried about some of the pitting on surface of heads. I might try talking to a machinest about that, so don't hold them because of me.
thanks Bill


BlownMGB-V8
Jim Blackwood
9406 Gunpowder Rd., Florence, KY 41042
(5912 posts)

Registered:
10/23/2007 12:59PM

Main British Car:
1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS

authors avatar
Re: 300 heads/crank/bells
Posted by: BlownMGB-V8
Date: February 24, 2020 10:19AM

resizedhead1.jpg

resizedhead2.jpg


BlownMGB-V8
Jim Blackwood
9406 Gunpowder Rd., Florence, KY 41042
(5912 posts)

Registered:
10/23/2007 12:59PM

Main British Car:
1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS

authors avatar
Re: 300 heads/crank/bells
Posted by: BlownMGB-V8
Date: May 20, 2020 10:50AM

The heads are gone and I'm holding onto the crank for awhile, until I get the bottom end of the stroker 300/350 built so that leaves the bellhousings still available.

Jim


Sorry, only registered users may post in this forum.