Classified Ads: Swap Parts Here!

This is preliminary notice that I'll be posting various Buick/Rover parts for sale over the weekend. It will take some time to post pics and I'm not even sure the pics are worth the time, we all know what the parts look like. I'm not selling junk and I'm not looking to price gouge. I'll get some pricing up by the weekend. PM me for more info.

Engines:
1ea Rover 4.0 crossbolted fully dressed. Very clean, possible it could be freshened and run.
1ea Rover 3.5 fully rebuilt, new Crower mild cam, new 9.35:1 pistons, oiling mods completed. this engine will not be run prior to selling which will allow the buyer to open it to verify specs and build. All machine work done by Seattle Autosport. Heads are Rover with new valves, seats and springs.
2ea Buick 215s. Complete engines that should be rebuilt.
1ea 64 Buick 300, fully dressed turns but needs a rebuild I believe.
3ea Buick/Rover blocks with main caps. One of these engines has the head, oil pan and intake, no crank, no cam, it was being used as a mockup engine but very clean and rebuildable.

Misc:
4ea Buick V6/300 timing cover (timing mark on the right)
3ea Rover timing cover (mark on the left). One of these has some pitting in the waterpump area but is still usable.
1ea Rover interim cover (hard to find)
4ea Buick 215 4 barrel intake
5 sets 64 Buick 300 heads (various rockers)

I have a significant amount of misc parts, oil adapters, oil pumps, rocker covers (all stock Rover/Buick, nothing fancy) some trannies and bellhousings.

WTB 1964 Buick 300 Aluminum cylinder heads

Please email with pictures and price

Thanks,

Don

Hi Brian,
Do you still have the 4 barrel intake Manifold? How much ?
Looking for a camshaft and crankshaft?
They can be in very bad shape. Just to put in a worn out engine bloc as a model.
I live in Lynchburg, VA
Werner

Hey Brian,

Would you happen to have a 2-barrel manifold for the Buick 300. I may go with the Snyper 2-barrel EFI instead of the 4-barrel. The Holley tech suggested that since my motor would probably only be at 300hp that the 2-barrel would be a better option. Thanks.

sal

Brian,
Do you still have the intake manifold

Sorry guys, I have not been online lately and missed these questions.

I have several good sets (4-5) of the Buick 300 heads, most without rockers. $250-$300 per set depending on rocker setup.
I have 3 Buick 300 cranks all in good shape. $125 per crank.
I have 2 sets of Buick 215 heads in great shape. $100 per set
I have a 1 Buick 300 2 barrel intake. $100
Many front covers for these engines. $50
Many Buick 215 4 barrel intakes. $150
I have an used Buick 300 camshaft. $25
I have a Rover 4.0L (nice shape), no oil pan, timing cover or intake (all available) for $250
I have 1-2 Buick/Rover oil pans (MG setup) $150 ea

Most of these items do not ship easily or cheaply.