Anyone put in an LSx into a TVR 2500M?
Has anyone here swapped or seen a swap of an LS1 into a TVR 2500M?
Any pictures / suggestions / ideas / problems faced? These are some dimension I found on this site - [www.chevroletls1.com] The Corvette LS1 engine measures approximately 25.25" long (Rover V8 is 27.5"), LS1 overall height is 24-25" (Rover V8 is 25.5" plus the carb and air filter or efi plenum, 29-30" or more), LS1 width across the cylinder heads is 20.5" (Rover V8 is 20"). With the T56 6 speed gearbox fitted the LS1 is some 3" shorter than a Rover V8 with a standard 5 speed gearbox. Edited 1 time(s). Last edit at 10/24/2010 09:19PM by vinax. |
Re: Anyone put in an LSx into a TVR 2500M?
SLOW M has. On here and PH.
I popped an LS6 in my Chim (sold now). [www.freewebs.com] Jelly [www.pistonheads.com] |
slow_M Bernard Holzberg (59 posts) Registered: 07/18/2008 11:12AM Main British Car: 1975 TVR M series Ford 331 |
Re: Anyone put in an LSx into a TVR 2500M?
Jelli, mine's a Ford 302 punched out to 331. Stainless_Steve on PH is doing this one-> [www.pistonheads.com]
BH |
slow_M Bernard Holzberg (59 posts) Registered: 07/18/2008 11:12AM Main British Car: 1975 TVR M series Ford 331 |
Re: Anyone put in an LSx into a TVR 2500M?
Yes, you were. Pound for pound and horse for horse, very close.
One day, eight pots, no waiting. For now, I wait. For $. B. |