Moderator Curtis Jacobson Portland Oregon (4577 posts) Registered: 10/12/2007 02:16AM Main British Car: 71 MGBGT, Buick 215 |
new to gallery... a Buick V6 powered MGB
Some people make our hobby look easy!
See it here: Darrell Levine's 1978 MGB with Buick 231cid V6 Engine |
ex-tyke Graham Creswick Chatham, Ontario, Canada (1165 posts) Registered: 10/25/2007 11:17AM Main British Car: 1976 MGB Ford 302 |
Re: new to gallery... a Buick V6 powered MGB
Wait a minute! - I know that Saguaros don't grow in Winnipeg......must have had a MG vacation in Arizona.
Nice clean build Darrell, and I see that you've retained the heater for those not-so-warm Manitoba Winters. |
BlownMGB-V8 Jim Blackwood 9406 Gunpowder Rd., Florence, KY 41042 (6470 posts) Registered: 10/23/2007 12:59PM Main British Car: 1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS |
Re: new to gallery... a Buick V6 powered MGB
Looks like it's tucked in there nice and neat. That would have been before the bellhousing pattern was changed to the small GM corporate pattern, right? And I'm thinking that engine has taller intake ports? Probably the one that the TA aluminum heads fit. Looks like a sweet ride.
Jim |
djw090 David Witham Warwick UK (115 posts) Registered: 06/12/2008 11:20AM Main British Car: MGB 1974 and MG ZT 160 turbo 2005 |
Re: new to gallery... a Buick V6 powered MGB
The use of the standard MG 'box and o/d is interesting. You don't see that too often with conversions.
|
Re: new to gallery... a Buick V6 powered MGB
Darrell is on the mgexperience and I remember when his car got rear ended. If I'm correct I think he was towing it on a dolly on the interstate in North Dakota and got rear ended by a girl on a cellphone. The replacement sure turned out nice!
|
mgb260 Jim Nichols Sequim,WA (2465 posts) Registered: 02/29/2008 08:29PM Main British Car: 1973 MGB roadster 260 Ford V8 |
Re: new to gallery... a Buick V6 powered MGB
Jim B, Most 85-87 Buick 3.8 are FWD and small V6 bellhousing pattern. Last RWD were Turbo GN and Regal.My favorite V6 to run carb. Remember the old thread on front covers with gerotor oil pumps. Some 86 were roller cammed too.
Edited 1 time(s). Last edit at 02/10/2012 05:31PM by mgb260. |