pspeaks Paul Speaks Dallas, Texas (698 posts) Registered: 07/20/2009 06:40PM Main British Car: 1972 MGB-GT 1979 Ford 302 |
MGB Trailer
This is just a thought, but has anyone put a receiver hitch on an MGB and if so can it be hidden without the ball so as not to be too ugly? I haven’t made up my mind to do it, but a small trailer might be nice for medium to long trips.
Paul |
Moderator Curtis Jacobson Portland Oregon (4577 posts) Registered: 10/12/2007 02:16AM Main British Car: 71 MGBGT, Buick 215 |
Re: MGB Trailer
Yep. Two of our MGB guys come to mind, Steve DeGroat and Bernie Posey. Here's a snapshot of Steve's trailer hitch:
I bet he'll post shortly with some tips. |
Capt'n Moorgone Mike Moor Angola,IN (116 posts) Registered: 11/20/2008 07:05PM Main British Car: 1973 MGB 300 Buick |
Re: MGB Trailer
Paul ,I mounted a 1" square tube verticlly behind the bumper out of sight.Then you just cut the ball mount and weld it 90 degrees to vertical.I can get you some pics if interested.My car is a rubber bumper car converted to chrome.Might be tougher on a chrome bumper. Mike
|
Citron Stephen DeGroat Lugoff, SC (367 posts) Registered: 10/23/2007 09:43PM Main British Car: 1970 MGBGT V6, 7004R, AC, matching trailer 3.1 liter |
Re: MGB Trailer
Paul,
I got a receiver off of a Pontiac wagon from the juck yard for $20. It was about 5 ft long. Just cut it to length, and wlded on brakets for the ends and bolted on where the rear bumper attached. If you are running bumpers, just use onger bolts. It does make the exhaust a little more fun. Mins stops before the receiver. I have used it for many miles now. Even towed an MGC on a dolley home with it.(maybe 5 miles) Good luck. Steve |
pspeaks Paul Speaks Dallas, Texas (698 posts) Registered: 07/20/2009 06:40PM Main British Car: 1972 MGB-GT 1979 Ford 302 |
Re: MGB Trailer
Thanks Steve, I did something like that on my T-Bucket but I didn't have to deal with suspension, exhaust, or a gas tank. On second thought, I guess I didn't do something like that!!
Paul |
|