Triumph Sports Cars

engine swaps and other performance upgrades, plus "factory" V8s (Stag and TR8)

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


Sidecardoug
Doug Rowe
Northern Nevada
(51 posts)

Registered:
07/04/2012 05:09PM

Main British Car:
1969 TR-6 Ford 302

Decent source for TR-6 brake calipers?
Posted by: Sidecardoug
Date: April 21, 2017 10:02PM

Hi- does anyone know of a decent source for TR-6 brake calipers ? After about 5 months of being stationary,
I went to pull my TR-6 / Ford out of the garage and the pedal went almost to the floor. I noticed some liquid
on the backside of the caliper, so at his point it's just a strong hunch on my part.... hope to get the car up in the air soon so I can take a better look.
Thanks, for any help
Doug

P.S I'm in Northern Nevada


88v8
Ivor Duarte
Gloucestershire UK
(1041 posts)

Registered:
02/11/2010 04:29AM

Main British Car:
1974 Land Rover Lightweight V8

Re: Decent source for TR-6 brake calipers?
Posted by: 88v8
Date: April 22, 2017 07:51AM

Moss have pretty much everything for the TR6.
[www.mossmotors.com]

I parked my TR6 outside for 5 years. When I revived it last month the brakes needed nothing. Why? Because before I parked it I always changed the Dot 4 fluid every year. Fresh fluid = no water = no corrosion = no leaks.
Otoh I hadn't changed the clutch fluid for about 3 years - the master was weeping and the slave was positively dripping watery rusty fluid.

Just a thought.

Ivor



Edited 1 time(s). Last edit at 04/22/2017 07:52AM by 88v8.


Sidecardoug
Doug Rowe
Northern Nevada
(51 posts)

Registered:
07/04/2012 05:09PM

Main British Car:
1969 TR-6 Ford 302

Re: Decent source for TR-6 brake calipers?
Posted by: Sidecardoug
Date: April 22, 2017 12:31PM

Thanks, Ivor !

I had tried my usual sources, everything was " not available." I will definitely keep Moss Motors
on my list of resources !
Doug


Sidecardoug
Doug Rowe
Northern Nevada
(51 posts)

Registered:
07/04/2012 05:09PM

Main British Car:
1969 TR-6 Ford 302

Re: Decent source for TR-6 brake calipers?
Posted by: Sidecardoug
Date: July 05, 2017 06:52PM

Moss Motors had the parts- Very reasonably priced, amazingly quick delivery. Turned out that there was a
seepage from left caliper, and the master cylinder was bypassing as well. ( Moss had that too- calipers, master cylinder, hoses, pads and install kit all brand new, not refurb.) Moss gets my 5 star award !

Doug


Sorry, only registered users may post in this forum.