Triumph Sports Cars

engine swaps and other performance upgrades, plus "factory" V8s (Stag and TR8)

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


Moderator
Curtis Jacobson
Portland Oregon
(4577 posts)

Registered:
10/12/2007 02:16AM

Main British Car:
71 MGBGT, Buick 215

authors avatar
lightly modified Triumph TR250
Posted by: Moderator
Date: December 06, 2012 12:21PM

In case you haven't been over to our Racecar section lately, I thought I'd cross-post this link...

Article: Kas Kastner / Peter Brock Triumph TR250K was built for Sebring 12-hour race and car shows

I think the dashboard is especially cool:
http://www.britishracecar.com/BillHart-Triumph-TR250K/BillHart-Triumph-TR250K-EA.jpg


motek
George Smathers
Spokane, WA
(118 posts)

Registered:
09/12/2009 02:45PM

Main British Car:
1967 Morris Minor (48 hp @ crank!), 1971 TR6 302

Re: lightly modified Triumph TR250
Posted by: motek
Date: December 06, 2012 02:49PM

Why do racecars always have bare stainless steel interiors? I understand the fire risk but don't their feet slip around in there? A little oil, sweat, or blood would seem to be a real problem.

George


Moderator
Curtis Jacobson
Portland Oregon
(4577 posts)

Registered:
10/12/2007 02:16AM

Main British Car:
71 MGBGT, Buick 215

authors avatar
Re: lightly modified Triumph TR250
Posted by: Moderator
Date: December 06, 2012 04:56PM

Aluminum paneling is popular because it's lightweight, non-flammable, and relatively easy to keep clean. In the early days of sports car racing, some people considered it unsportsmanlike to strip out interior trim. I don't know exactly when, but that shifted 180 degrees - probably due to in-car fires. Now days, it's extremely rare to see carpet or rubber mats.

Notice that the driver has a dead pedal (at left) and a heel bar:
http://www.britishracecar.com/BillHart-Triumph-TR250K/BillHart-Triumph-TR250K-EH.jpg
The next step would be to glue a friction material (sandpaper) to the floor for his heels.

You could paint the aluminum interior, but paint scratches so easily! I've had bare aluminum door panels in my MGB street car for over 20 years, and I like them. The only downside I really notice is that they don't absorb any noise.


motek
George Smathers
Spokane, WA
(118 posts)

Registered:
09/12/2009 02:45PM

Main British Car:
1967 Morris Minor (48 hp @ crank!), 1971 TR6 302

Re: lightly modified Triumph TR250
Posted by: motek
Date: December 06, 2012 05:54PM

Thanks Curtis!

George


Bill Young
Bill Young
Kansas City, MO
(1337 posts)

Registered:
10/23/2007 09:23AM

Main British Car:
'73 MG Midget V6 , '59 MGA I6 2.8 GM, 4.0 Jeep

authors avatar
Re: lightly modified Triumph TR250
Posted by: Bill Young
Date: December 19, 2012 08:11PM

Some guys are now using a bit of brush on pick up bed liner on the floors. Makes them a bit more non-skid and adds some insulation as well for not a lot of weight. You can get it in lighter colors than the usual black so seeing into the are for any maintenance would be easier.


Sorry, only registered users may post in this forum.