Engine and Transmission Tech

tips, technology, tools and techniques related to vehicle driveline components

Go to Thread: Previous•Next
Go to: Forum List•Message List•New Topic•Log In


Dave
David Gable
Jax
(112 posts)

Registered:
10/23/2007 05:40AM

Main British Car:
Flywheel won't fit.................. any help is appreciated
Posted by: Dave
Date: January 06, 2011 07:30PM

I bought a NOS Schiefer alloy flywheel on ebay from a parts distributor who assured me that it would fit my 300. Well, it does not. It has 166 teeth and is externally balanced but the indexing hole and bolt pattern are too large by a good margin. It came in a box marked 630-0012 but that # is nowhere to be found on the flywheel. There are three ink stamps on the back - "2711A", "669" and another that is smudged with the last two #'s "66". The index hole is ~2 7/8" and the center-to-center bolt pattern is 3 5/8". Overall diameter is 14". Can anyone help me ID this piece? The sad thing is I sold my other alloy flywheel based on the seller's assurance that it was measured and was correct. Live and learn.
kdk_2450_rsz.jpg
kdk_2453_rsz.jpg
kdk_2435_rsz.jpg
kdk_2440_rsz.jpg



Edited 3 time(s). Last edit at 01/26/2011 07:09PM by Dave.


Dave
David Gable
Jax
(112 posts)

Registered:
10/23/2007 05:40AM

Main British Car:
Re: Just Picked This Up
Posted by: Dave
Date: January 06, 2011 07:33PM

Schiefer 630-0012


Go to: Forum List•Message List•New User Registration•Log In
Sorry, only registered users may post in this forum.