roverman Art Gertz Winchester, CA. (3188 posts) Registered: 04/24/2009 11:02AM Main British Car: 74' Jensen Healy, 79 Huff. GT 1, 74 MGB Lotus 907,2L |
How to id. Daimler 2.5L hemi head ?
I have an aluminum hemi head, about 4.25" bore spacing and push rod actuated. Nobody I show it to can id. it. "Wiki" no help. It has casting and stamped #'s. What's next ? If I only found one more.... what a sweet RV8, to me. Thanks, art.
Edited 1 time(s). Last edit at 11/30/2016 10:03AM by Moderator. |
88v8 Ivor Duarte Gloucestershire UK (1041 posts) Registered: 02/11/2010 04:29AM Main British Car: 1974 Land Rover Lightweight V8 |
Re: How to id. Dailer 2.5L hemi head ?
|
Moderator Curtis Jacobson Portland Oregon (4577 posts) Registered: 10/12/2007 02:16AM Main British Car: 71 MGBGT, Buick 215 |
Re: How to id. Dailer 2.5L hemi head ?
I suppose you've looked at photos here already: [www.britishracecar.com]?
|
mgb260 Jim Nichols Sequim,WA (2463 posts) Registered: 02/29/2008 08:29PM Main British Car: 1973 MGB roadster 260 Ford V8 |
Re: How to id. Daimler 2.5L hemi head ?
Art, remember a while back there was a V8 with 4 cylinder Toyota head on it. Does it look like those?
[forum.britishv8.org] Edited 1 time(s). Last edit at 11/30/2016 10:18AM by mgb260. |
roverman Art Gertz Winchester, CA. (3188 posts) Registered: 04/24/2009 11:02AM Main British Car: 74' Jensen Healy, 79 Huff. GT 1, 74 MGB Lotus 907,2L |
Re: How to id. Daimler 2.5L hemi head ?
Ok, none of the above. Guess I need to get photo capable and start a "name that head" contest ?
|
Re: How to id. Daimler 2.5L hemi head ?
I have 3 spare heads for the SP250 however will not have access to them till Saturday (10th Dec) I can photograph them for you to compare.
|
roverman Art Gertz Winchester, CA. (3188 posts) Registered: 04/24/2009 11:02AM Main British Car: 74' Jensen Healy, 79 Huff. GT 1, 74 MGB Lotus 907,2L |
Re: How to id. Daimler 2.5L hemi head ?
That would be great Dennis. The bore spacing is my first question. Thanks, art.
|
|