Engine and Transmission Tech

tips, technology, tools and techniques related to vehicle driveline components

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


Sidecardoug
Doug Rowe

(39 posts)

Registered:
07/04/2012 05:09PM

Main British Car:


PCM upgrades for pre-OBD2 systems
Posted by: Sidecardoug
Date: July 13, 2018 04:30PM

Folks, I have finally found someone who does programming on GM Pre- OBD2 systems, including the 3.4 V6 !

[www.pcmperformance.com]

I'm using a 94 Camaro 3.4 with a 4L60E trans, and he told me he will be able to re-set the lock-up and shift points to suit my car when all the details like gear ratio, weight, etc have been finalized on my end.

I hope this info will smooth somebody's path !

Doug


Charles
Charles Long
McDonald, TN
(171 posts)

Registered:
09/15/2013 08:54AM

Main British Car:
1966 MGB V6 1994 Camaro 3.4L 60V6

authors avatar
Re: PCM upgrades for pre-OBD2 systems
Posted by: Charles
Date: July 22, 2018 09:34PM

I did my own with Tuner cats. OBD 1.5,1995 3.4 Camaro, 1996 T5, and 1995 EFI


BMC
Brian Mc Cullough
Forest Lake, Minnesota, USA
(374 posts)

Registered:
10/30/2007 02:27AM

Main British Car:
1980 MGB '95 3.4L 'L32' SFI V6, GM V6T5 & 3.42 Limi

authors avatar
Re: PCM upgrades for pre-OBD2 systems
Posted by: BMC
Date: October 06, 2018 11:08PM

Doug,

I've been tuning these for quite a number of years. You would have to call me to determine if it's worth tuning. The factory settings are very good and I've heard from a few people who are trying to get more power by sending the PCM in to someone. It usually ends up with problems.

We also offer just about Every part for the L32 3.4L Camaro/Firebird 1993 - 1995 engines, especially in the MGB for over 18 years.

-BMC.


Sorry, only registered users may post in this forum.