Engine and Transmission Tech

tips, technology, tools and techniques related to vehicle driveline components

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


jjohanski
James Johanski

(56 posts)

Registered:
11/15/2017 08:57AM

Main British Car:


Buick 215 parts for Buick 300
Posted by: jjohanski
Date: November 12, 2020 10:18AM

Can anyone tell me which 215 parts can still be used on a Buick 300?
Specifically--Flywheel, clutch and cover, Starter?
I am again thinking of doing a Buick 300 with aluminum heads and 4 barrel intake rather than a 215.
Jim Blackwood?
Thanks in advance for any help.



Edited 1 time(s). Last edit at 11/13/2020 11:06AM by MGBV8.


mgb260
Jim Nichols
Sequim,WA
(2061 posts)

Registered:
02/29/2008 08:29PM

Main British Car:
1973 MGB roadster 260 Ford V8

Re: Buick 215 parts for Buick 300
Posted by: mgb260
Date: November 12, 2020 12:02PM

Only rocker arms and shaft, cams.


BlownMGB-V8
Jim Blackwood
9406 Gunpowder Rd., Florence, KY 41042
(5968 posts)

Registered:
10/23/2007 12:59PM

Main British Car:
1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS

authors avatar
Re: Buick 215 parts for Buick 300
Posted by: BlownMGB-V8
Date: November 12, 2020 12:48PM

The heads will bolt up but the only reason to use them would be if you were building an economy motor and were real weight conscious. Could use late Rover heads OK. Uses a more common flywheel pattern, rods are longer, deck is taller and intake is wider. Can use BOPR intakes with spacers and fabricated lifter valley cover.

Front cover will interchange along with oil pump. Valve covers cross. Pan doesn't.

Jim


Sorry, only registered users may post in this forum.