Engine and Transmission Tech

tips, technology, tools and techniques related to vehicle driveline components

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


mgb260
Jim Nichols
Sequim,WA
(2241 posts)

Registered:
02/29/2008 08:29PM

Main British Car:
1973 MGB roadster 260 Ford V8

idea of one piece intake adapter Rover to 300 Buick
Posted by: mgb260
Date: January 18, 2022 11:47AM

I got this idea from viewing these Ford adapters. 302 to 351 and Cleveland to FE. Would allow use of Edelbrock Performer or Offy 360 single plane for 215/Rover on the 300.
download (5).jpg
download (4).jpg



Edited 2 time(s). Last edit at 01/18/2022 11:50AM by mgb260.


mgb260
Jim Nichols
Sequim,WA
(2241 posts)

Registered:
02/29/2008 08:29PM

Main British Car:
1973 MGB roadster 260 Ford V8

Re: idea of one piece intake adapter Rover to 300 Buick
Posted by: mgb260
Date: January 18, 2022 01:16PM

Here's a 350 Buick lower with a SB Mopar top. Maybe gut a 300 2 barrel intake to fit Rover intake and do the same?
494999-1385422973-d8623a0e33e873b6c38e5a5fd7f575d5 (1) (1).jpg



Edited 2 time(s). Last edit at 01/18/2022 02:17PM by mgb260.


BlownMGB-V8
Jim Blackwood
9406 Gunpowder Rd., Florence, KY 41042
(6218 posts)

Registered:
10/23/2007 12:59PM

Main British Car:
1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS

authors avatar
Re: idea of one piece intake adapter Rover to 300 Buick
Posted by: BlownMGB-V8
Date: January 18, 2022 02:03PM

It'd take a different upper but maybe...

Also might cut down a 300 intake like that and use it as a spacer for a Rover intake. Not sure how well that would match up but it should be really close.

Jim


BriansMGBV8
Brian Macmillan
Seattle
(52 posts)

Registered:
09/26/2008 12:39PM

Main British Car:
72 MGB Roadster Rover 4L

Re: idea of one piece intake adapter Rover to 300 Buick
Posted by: BriansMGBV8
Date: January 23, 2022 05:21PM

I may end up going this route if Anthony doesn’t complete the 300 intake by this summer. Im no expert by any means but it looks like combining the 2 intakes (pan cover& intake) could be made to work.


Sorry, only registered users may post in this forum.