Engine and Transmission Tech

tips, technology, tools and techniques related to vehicle driveline components

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


ag1234
Arthur Gertz

(119 posts)

Registered:
03/29/2023 08:26PM

Main British Car:


Cad stroker crank for RV8 ?
Posted by: ag1234
Date: June 18, 2024 12:07PM

4,9L., last push rod motor. Thrust on #3, 1 pc rear seal with 3.625" stroke. RJ 1.93", Mains 2.625.
Happy Hot Rodding, Art.


Airwreckc
Eric Cumming
RTP, North Carolina
(253 posts)

Registered:
05/28/2020 10:10AM

Main British Car:
1972 MGB-GT (working on a Sebring project) Buick 300-4 V8

Re: Cad stroker crank for RV8 ?
Posted by: Airwreckc
Date: July 09, 2024 06:29AM

Hi Art, which RV8 are you suggesting this crank for? Would it also work for the Buick 300? In any case, what mods (if any) are needed?


ag1234
Arthur Gertz

(119 posts)

Registered:
03/29/2023 08:26PM

Main British Car:


Re: Cad stroker crank for RV8 ?
Posted by: ag1234
Date: August 06, 2024 05:33PM

I am hereby released of all liability.! You could borrow/rent a Cad crank, carefully lower into 300' Buick main journals,( without bearings). Cad 4.9L rods or Honda ? Juggle foe 305" sbc pistons/ or ?
Good Luck, Art.


Sorry, only registered users may post in this forum.