Steering, Suspension, & Brakes

tips, technology, tools and techniques related to non-driveline mechanical components

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


Commiss
Wayne Dukes

(2 posts)

Registered:
01/30/2013 09:31AM

Main British Car:


Mustang II front suspension
Posted by: Commiss
Date: January 30, 2013 09:58AM

Would like to hear from anyone about using a Mustang two front suspension in an MGA. I've used them in Anglias and a
Austin A35 and they work great. The Anglia front suspension I bought sets up a 45.5" front track and the MGA is 47.5". Seems it would work with little trouble. Any help would be appreciated. Tks
80.JPG



Edited 1 time(s). Last edit at 01/30/2013 10:38AM by Moderator.


jblanchard@hcpg.net
Jeb Blanchard
Collierville, TN
(53 posts)

Registered:
12/07/2007 01:01PM

Main British Car:
1961 MGA Chevy 4.3 Vortec V-6

authors avatar
Re: Mustang II front suspension
Posted by: jblanchard@hcpg.net
Date: January 30, 2013 12:19PM

Here are some photos of a Mustang II front end in my MGA. Hope this helps!

Jeb

frontend 2.jpg
frontend4.jpg
frontend 5.jpg
frontend6.jpg


Commiss
Wayne Dukes

(2 posts)

Registered:
01/30/2013 09:31AM

Main British Car:


Re: Mustang II front suspension
Posted by: Commiss
Date: February 05, 2013 09:41AM

Is this crossmember an aftermarket product or did you build it yourself?


tbo
Tim Body
St Thomas Ontario
(221 posts)

Registered:
01/27/2013 06:47PM

Main British Car:
1954 Triumph TR2 stock 2 litre

Re: Mustang II front suspension
Posted by: tbo
Date: February 14, 2013 08:58PM

I'm not sure but probably that was the Mustang II complete unit and they took out some of the crossmember in the middle to make it narrower by the desired amount. If you look at the TR6 build recently posted on the Triumph section that is whar Phil did. tim


Sorry, only registered users may post in this forum.