Steering, Suspension, & Brakes

tips, technology, tools and techniques related to non-driveline mechanical components

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


roverman
Art Gertz
Winchester, CA.
(3188 posts)

Registered:
04/24/2009 11:02AM

Main British Car:
74' Jensen Healy, 79 Huff. GT 1, 74 MGB Lotus 907,2L

How to get positive caster ?
Posted by: roverman
Date: January 05, 2021 12:56PM

VW Bug, king pin front suspension. I believe upper/lower control arms, are equal length, so no roll caster-gain. I suspect tilting whole suspension assembly, rearward at top, will generate static positive caster. Anyone familiar with this suspension ?
Thanks, Art.


BlownMGB-V8
Jim Blackwood
9406 Gunpowder Rd., Florence, KY 41042
(6496 posts)

Registered:
10/23/2007 12:59PM

Main British Car:
1971 MGB Blown,Injected,Intercooled Buick 340/AA80E/JagIRS

authors avatar
Re: How to get positive caster ?
Posted by: BlownMGB-V8
Date: January 05, 2021 05:34PM

The arms were oriented so they pivot along the cross axis of the car and I believe they were all four the same length A torsion bar inside one of the two cross tubes handled the spring load and was adjusted with a center bolt for height. Caster was dependent on the angle of the brackets that the tubes were bolted to.

Jim


Sorry, only registered users may post in this forum.