jblanchard@hcpg.net Jeb Blanchard Collierville, TN (53 posts) Registered: 12/07/2007 01:01PM Main British Car: 1961 MGA Chevy 4.3 Vortec V-6 |
Re: Hood Cowl
|
V6 Midget Bill Young Kansas City, MO (1337 posts) Registered: 10/23/2007 09:23AM Main British Car: '73 MG Midget V6 , '59 MGA I6 2.8 GM, 4.0 Jeep |
Re: Hood Cowl
Dennis, with the amount of coverage you need as far as height and depth go I think I'd try something similar to the idea Jeb showed, but longer and blended into the front of the hood area. Morespeed Performance makes a modified C type hood that would probably clear your engine, but making your own isn't terribly difficult if you have a minimum of metal working skill. I did a pretty large bulge in my Midget hood to clear the fuel injection using panels cut from an old hood I picked up at a swap meet.
|
|
Moderator Curtis Jacobson Portland Oregon (4576 posts) Registered: 10/12/2007 02:16AM Main British Car: 71 MGBGT, Buick 215 |
Re: Hood Cowl
Quote: Quote: We've spend so much time building a photo gallery and a huge collection of "How It Was Done" articles, and you guys can't be troubled... Dennis McIntyre's How It Was Done article |
mindseye John Csuhany Edmonton, Alberta, Canada (76 posts) Registered: 11/18/2009 11:40AM Main British Car: 1980 MGB 1962 Buick 215 cu. in. |
Re: Hood Cowl
|