Bodywork, Paint, Interior, Trim, & Wiring

discussions about bodywork, paint, interiors, trim, audio, electrical components, wiring, etc.

Go to Thread: PreviousNext
Go to: Forum ListMessage ListNew TopicLog In


roverman
Art Gertz
Winchester, CA.
(3188 posts)

Registered:
04/24/2009 11:02AM

Main British Car:
74' Jensen Healy, 79 Huff. GT 1, 74 MGB Lotus 907,2L

How to strip enamel-only
Posted by: roverman
Date: October 19, 2016 06:49PM

I'm told there is no known chemical, that will strip enamel and leave the 1973 laquer, underneath. So ,alternatives: a. Chemstrip all coatings down to bare fiberglass = real messy and a lot of prep/ paint, for a 2 stage quality job. b. soda blast-off enamel coat ? c. orbital sand-off enamel coat ? Anybody ? Thanks, Art.


Preform Resources
Dave Craddock
Redford,Michigan
(359 posts)

Registered:
12/20/2008 05:46PM

Main British Car:
72 MGB V6 3.4

Re: How to strip enamel-only
Posted by: Preform Resources
Date: October 27, 2016 06:24PM

Art, no problem in using a liquid stripper,,,,,,,,,,,, you just cant leave it on till it attacks the FRP substrate and what would be the purpose in leaving any old "paint " substrate, when the object is to establish a new base to do your paint on .
Dave


DiDueColpi
Fred Key
West coast - Canada
(1365 posts)

Registered:
05/14/2010 03:06AM

Main British Car:
I really thought that I'd be an action figure by now!

authors avatar
Re: How to strip enamel-only
Posted by: DiDueColpi
Date: October 27, 2016 10:17PM

Art,

If only it had been 1972 lacquer...we might have had something for you.

cheers
Fred


Sorry, only registered users may post in this forum.